Aerospace & Defense
Today’s aerospace industry focuses on cost effectiveness, quality product within a stipulated period of time. And that is what we are committed on. Innovation combined with optimized performance enables us to deliver the best services as per the client’s need. We make ourselves flexible as per the client requirements not compromising with the quality of work. Our professional devotion to work leads us to reach the right solution at the first time.
Overview
Today’s aerospace industry focuses on cost effectiveness, quality product within a stipulated period of time. And that is what we are committed on. Innovation combined with optimized performance enables us to deliver the best services as per the client’s need. We make ourselves flexible as per the client requirements not compromising with the quality of work. Our professional devotion to work leads us to reach the right solution at the first time.
We have been associated with leading aerospace companies for design and development of next generation Aircraft’s, Helicopters, Satellites, Launch vehicles and Unmanned aircraft’s. We have extensive experience in design and analysis of aerospace components in both sub-system and system level. We undertake turnkey solutions for the major aerospace clients. Our valued customers have derived immense benefit from our services. Our esteemed clientele includes few of the leading Aerospace companies in India and Abroad.
Services Offering:
- Primary and secondary structures expertise
- Ownership of Design and Analysis
- Fatigue and damage tolerance
- Certification and optimization
- Product Line Support
- Should Costing and Value Analysis & Value Engineering
- Engine mounts & Frames
- Door Structures
- Ground and Multifunctional Spoiler
- Fuselage
- Stringers
- Wing spars
- Flaps & Wing
- Tail cone
- Tooling
- Radome
- Autopilots
- Thrust Management Systems
- Flight Controls
- Aircraft data computer
- Avionics data transfer protocols
- Flight data analysis systems
- Cabin pressure control system
- Test equipment design and development
- Global Positioning System
- Safety critical software and hardware development lifecycle
- Test Rigs as product solutions
- Power Electronics
- Obsolescence Management
- EMI/EMC Testing
- Safety Analysis
- FPGA Verification
- Slat Flap Controller,
- Fuel Management & Indication Systems
- Electrical Power Systems
- Cockpit Displays & MMI
- Communication Protocols
- ADC Annunciation
- Flight Management Systems
- DCUs, Nose Wheel Steering System
- Landing Gear Systems
- Health Monitoring (CMS) Standards: RTCA/DO-178C, RTCA/DO-254, DO-160E, ARP 4761, MIL-217-F,RTCA/DO-178B
- Lifecycle expertise from Requirements to Delivery
- Concept, styling and renderings
- Design, detailing and installation drawings
- Wire harness routing
- Stress analysis and certification reports
- Side Panels & Ceilings
- Stowage Bins
- Insulation
- Galleys
- Lavatories
- Partitions
- Closets
- Vanes and Blades
- Discs
- Casings
- Shafts
- Bearing supports
- After burner systems
- Nozzle structure
- Nacelle structure
Mechanical, Pneumatic & Hydraulic System Design
- Installations and instrumentation
- Hydraulic system equipment design support
- Pneumatic system equipment design support
- Product Line Support
- Test, certification and test documentation
- Systems installation for water and waste management, hydraulics and electrical
- Manufacturing Engineering
- Areas: Landing Gear, Actuators, FCS Circuit Linkages and Mechanisms
- Standards: MIL Standards, FAR 23, FAR 25, ARP 4761, 4754, 1281, 1383, 490 and Environment Standards – MIL-STD-810, RTCA DO-160.
Electrical, Electronic & Software System Design
- Configuration Management
- Functional Definition, including Wiring diagrams
- Harness Pre-definition, including Concept and Detail design
- Installation Definition
- Harness Definition Dossier
- System Integration checks and installation support
- Electrical Harness Master Routing,
- Electrical Systems Check for Structures Systems cabin Integration (SSCI),
- Static Simulation
- Dynamic Simulation
- Linear Simulation
- Non-Linear Simulation
- Structural Simulation
- Fatigue & Durability Simulation
- Vibration Simulation
- Crash & Impact Simulations
- Aerodynamic Design and Analysis
- Structural Analysis
- Computational Fluid Dynamics
- Weight and Balance Analysis
- Power Plant Analysis
- Materials and Process Analysis
- Control Analysis
- Tool design
- NC and CMM Programming
- Process Planning and Methods Engineering
- Visual Work Instructions
- Aftermarket Services
- Upgrades for cabins and related systems
- Interior modernization
- Fleet harmonization
- PAX to FRT conversions
- Repairs and Maintenance
- New Repair schemes
- Air Frame MRO
- Component MRO
- Line MRO
- Engine MRO
- Repair amendments
- Inspections
- E-Learning for Pilots
- Flight Operations and Repairs
- Instructor Led Training
- Computer/Web Based Training
- Mobility enabled learning
- Content delivery in multiple formats
- Blended learning
- Digital Solutions
- Digital MRO
- Database maintenance
- Digital Health monitoring
- Component Maintenance Manuals (CMM)
- Inspection & Repair Manuals (CIR)
- Service Bulletins (SB)
- Troubleshooting Manuals
- Structure Repair Manuals
- Service Bulletins
- Illustrated Parts Catalog (IPC) and Supplementary IPC
- Engineering Change Management
- Technical Publications
- Aircraft Maintenance Manuals
- Component Maintenance Manuals
We provide comprehensive technology solutions and services to the aerospace industry and our principal skills lie in the Gas Turbines, Airframes and tooling. We also expertise in Jig, Fixture, Special Purpose Tool Design and Manufacturing.
Our culture is Integrated Disciplinary Teams (IDT), working coherently to achieve common solution, on time, every time. Our qualified work force includes senior consultants, averaging 25 years of dedication towards aerospace industry, senior engineers, with average experience of more than 18 years.
We provide comprehensive technology solutions and services to the aerospace industry and our principal skills lie in the Gas Turbines, Airframes and tooling. We also expertise in Jig, Fixture, Special Purpose Tool Design and Manufacturing.
As a leading Global Design House for Aerospace & Defence engineering services and solutions, LanceSoft Engineering is a partner of choice for top aircraft Original Equipment Manufacturers (OEMs) and several Tier I suppliers. We operate large-sized engineering centres for many of our customers. We support our partners not only in design and development but also in enabling them to become key market players in their respective countries and regions. Our extensive domain expertise across business jets, regional jets, commercial jets and trainers enables us to understand the major challenges that the industry faces and how to address them.
As A Trusted Partner, you can depend on TYZER to provide outstanding value to your organization in all areas of World-Class Technology, Expertise & Consulting.
We will help you Embrace and shape the future
Come collaborate with us and TYZER will support you in all areas.